Miterm S-150-6 Kiln    65,000 rubles.

The kiln is purposefully designed and manufactured to solve the problems associated with the high-temperature processing of steel blade blanks.

The heating elements in the kiln are silicon (silicon carbide) rods, which allows operating in the temperature range up to 1250 °C without overloading the kiln, which is typical for spiral heating. In addition, having a higher efficiency, the rods consume less electricity. The lining (thermal protection) of the kiln is made of special fiber, which in this temperature range is more stable than other materials and less prone to destruction. At the bottom of the chamber, in order to avoid damage when laying the blanks, a solid ceramic (cordierite) plate was additionally laid.

The design of the door allows you to lay the blade blanks without opening it. Billets are inserted between the fiber blocks and lowered to the bottom of the chamber. Part of the handle remains outside and remains cold. You can insert up to 3 blades at the same time.

The type of controller is multi-stage. 10 programs of 10 stages (steps) each.

At the request of the customer, it is possible to manufacture a furnace with other sizes, as well as equipping with an argon supply system.


Supply voltage 220 V

Frequency 50 Hz

Power consumption 2,5 kW

Power Consumption 11 A

Maximum temperature 1250 ºС

Warming up time to 1250 ºС - 60 minutes

Chamber dimensions H 140X W 150X D 300 mm

Chamber volume 6.3 L

The weight of the furnace is 29 kg

Warranty period of operation 12 months

             Warranty period of operation 12 months

Show More

© 2020 Mikroinstrument. All rights reserved


  • Vkontakte Social Иконка
  • Instagram Social Иконка
  • YouTube Социальные Иконка
  • TikTok
  • Ярмарка мастеров
  • etsy
  • Aliexpress

+7 (916) 642-76-34 |

+7 (901) 505-03-83 |

International shipments